Scott Prospect WFS Goggles

The SCOTT Prospect WFS Goggle is the perfect solution for racing in wet and muddy conditions. It comes equipped with a WFS50 roll-off system for a large and clear field of vision when the mud starts spraying. The canisters can be clipped directly on the WORKS lens pins for quick and easy installation, with no tools required. Tear-offs can then be easily installed on the same pins for extra vision protection. The transparent anti-stick grid offers a superior field of vision, smooth sliding on the lens and a better sealing with the lens at the top.

Features:

– Large 50mm film
– Click-on canisters
– Anti-stick grid with mudflap
– Lens Lock System
– Articulated outriggers

Frame Technologies:
– 50mm WORKS Film System canisters
– SCOTT anti-stick grid with mudflap
– Lens Lock System
– Articulated outriggers
– NoSweat 3-layer molded face foam
– Extra-wide, no-slip silicone strap

Lens Technologies:
– SCOTT TruView single WORKS lens
– NoFog™ Anti-Fog lens treatment
– EXTRAS2 rolls of film
– Microfiber goggle bag
– Noseguard

Technology:

Works Film System Canisters:
– The SCOTT WORKS Film System (WFS) consists of two canisters – the WORKS Motorside Canister and the WORKS Supplyside Canister. Both are attached to the goggle lens. The Motorside Canister has a strong engine and enough space to roll off the full dirty film, while the Supplyside Canister holds the film.

Nofog™ Anti-Fog Lens Treatment:
– SCOTT lenses undergo a permanent NoFog™ treatment process to prevent condensation and fogging.

Impact Resistance:
– In order to ensure that riders are safe from the impact of pebbles and flying debris, all SCOTT lenses not only meet, but exceed the required impact resistance standards required for MX lenses.

100% Uv Protection:
– All SCOTT lenses are optically engineered to screen out 100% of harmful UVA/UVB rays.

Click-On Canisters:
– No need for tools, no need to waste time. Simply click the canisters onto the WORKS pins and ride. The red lever ensures the canister is safely attached to the pins. This system is the ultimate in WORKS technology – switching from roll-offs to tear-offs has never been this easy. One lens does it all.

Integrated Canister Design:
– By designing the canisters behind the outriggers, they are positioned on the very edge of the lens, achieving maximum peripheral vision. With the strap wrapping around the canisters, the rope becomes easier to locate as you simply have to slide your hand along the strap until you find it.